鋁板是一種的建筑材料，它本身是一種比較環保的材質，鋁板廣泛應用于工程裝飾、家居裝飾、通信電子、交通設施、保溫防腐、汽車制造等領域。使用中有什么知識點要了解呢？下面鋁板生產廠家為您講解。
Aluminum plate is an excellent building material. It is a relatively environment-friendly material. Aluminum plate is widely used in engineering decoration, home decoration, communication electronics, transportation facilities, thermal insulation and anti-corrosion, automobile manufacturing and other fields. What knowledge points do you need to know in use? Next, the aluminum plate manufacturer will explain to you.
1、鋁板存放：應存放在干燥通風的地方，并平放在表面，不要踩踏、撞擊。
1. Storage of aluminum plates: The aluminum plates shall be stored in a dry and ventilated place, flat on the surface, and shall not be trampled or impacted.
2、鋁板搬運：板的四周應同時抬起，以免劃傷板的表面。
2. Aluminum plate handling: the four sides of the plate shall be lifted at the same time to avoid scratching the surface of the plate.
3、鋁板切槽：用插床或鑼機切槽時，應使用半圓頭銑刀。無論對鋁板的損傷是否太深，也不太淺，不易折疊，0.2-0.3mm厚的塑料芯應與鋁板一起彎曲，以增加強度和韌性，否則鋁板彎曲時可能斷裂或漆膜破裂。
3. Aluminum plate grooving: when slotting machine or gong machine is used for grooving, semicircle end milling cutter shall be used. No matter whether the damage to the aluminum plate is too deep, not too shallow, and not easy to fold, the 0.2-0.3mm thick plastic core should be bent with the aluminum plate to increase strength and toughness, otherwise the aluminum plate may break or the paint film may break when bending.
4、鋁板彎曲：彎曲邊緣時，應力均勻，成型一次，不要反復彎曲，否則鋁板可能斷裂。
4. Bending of aluminum plate: when bending the edge, the stress shall be uniform, forming once, and do not bend repeatedly, otherwise the aluminum plate may break.
5、鋁板電弧加工：應采用專用彎曲設備對電弧進行加工，使板材逐漸達到所需的表面，不得一次彎曲。
5. Arc processing of aluminum plate: special bending equipment shall be used to process the arc, so that the plate gradually reaches the required surface, and it is not allowed to bend at one time.

6、鋁板批次：同一類型不同批次的鋁板可能存在色差。在銷售和使用不同批次的紙張時，應增加色差比較程序。我公司主要經營合金鋁板、鋁花紋板等。只有在沒有視覺色差的情況下，才能在同一平面上使用。
6. Aluminum plate batch: aluminum plates of the same type and different batches may have color difference. When selling and using different batches of paper, color difference comparison procedures should be added. Our company mainly deals in alloy aluminum plate, aluminum pattern plate, etc. It can only be used on the same plane without visual color difference.
7、鋁板安裝方向：同色鋁板安裝在同一平面上時，流向應一致，否則會產生視覺色差。
7. Aluminum plate installation direction: When aluminum plates with the same color are installed on the same plane, the flow direction should be consistent, otherwise visual color difference will occur.
8、鋁板撕膜：鋁板安裝后45天內撕下保護膜，否則撕膜困難或發生膠轉移。
8. Tearing off aluminum sheet film: Tear off the protective film within 45 days after the installation of aluminum sheet, otherwise it will be difficult to tear off the film or glue transfer will occur.
9、鋁板使用條件：室內墻板應在室內使用，不得安裝在室外，以保證使用效果和使用壽命。
9. Service conditions of aluminum plate: the indoor wallboard shall be used indoors and shall not be installed outdoors to ensure the service effect and service life.
隨著越來越多消費者開始廣泛重視起了這樣的產品，然后使得它的相關信息引起了人們的高度重視。尤其是針對鋁板在使用時應該留心的事項，更是吸引了不少運用者的眼球。您有什么問題或者需求就來我們網站http://m.liyukeji.com咨詢！
As more and more consumers begin to attach great importance to such products, people attach great importance to its relevant information. Especially for the matters that should be paid attention to when using aluminum plates, it has attracted the attention of many users. Come to our website if you have any questions or needs http://m.liyukeji.com consulting service